Digital Monitoring XR5 Guía de usuario descargar pdf (Pagina 9)

LCD Keypad User’s Guide

XR5 User’s Guide

Fire Command Messages

SYSTEM NORMAL

This display indicates that  re protection devices, phone lines

to the panel, and the panel itself, are in good condition.

ALARM

A  re, supervisory, or auxiliary zone has been tripped. Your

system may sound the  re bells, strobes, and any other response

programmed into the system.

SILENCED

A user has silenced the  re bells by entering the code or by

using the Alarm Silence function in the User Menu. Even though

the bells are silenced, the system is still in a state of alarm. A

red LED on your keypad is on until a Sensor Reset is performed

(see the inside front cover).

SUPVSRY

A supervisory alarm has occurred and is in the Status List for

review.

BYPASS

A zone has been disabled by the system due to repeated trips.

If the zone remains normal for one hour it can be restored into

the system.

ENTER CODE

The system requires you to enter the user code. As you enter

the code, the display shows an asterisk (*) in place of each digit

pressed.

TRY AGAIN

The user code you have entered is not recognized by the

system. Check the code and try again.

INVALID CODE

You receive this message if you enter an incorrect user code a

second time, after receiving the Try Again message.

PH LINE 1 TRBL

There is a problem with the phone line connected to your

system. Call for service as soon as possible.

TROUBLE

There is a problem with a protection device or system

component. This display is accompanied by a description of the

problem.

SERVICE REQUIRED or SYSTEM TROUBLE

There is a problem on the system. Call for service.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Sin comentarios

Digital Monitoring XR5 Guía de usuario Pagina 9